Sunday, July 6, 2014

Stainless Steel Gate VS Galvanized Gate

















A gate is a hinged barrier (structure) which is used as an opening into and out of a compound which is well fenced. Different materials can be used in the manufacture of gates. These materials neither exhibit different characteristics from which you can choose the one that you prefer owing to the fact that in Singapore there is neither winter nor spring seasons.

Stainless steel gate versus galvanized gate

1. EASE IN GETTING STAINED 


Stainless steel gate
As compared to other galvanized materials which are used in gate construction, stainless steel does not easily get stained with foreign matter. Because of this, stainless gates are able to retain their original color even after every long period of time. This will have far reaching benefits to those who use stainless steel as they do not have to paint their gates now and then as is with other materials used in gate manufacture.

Its resistant to staining implies that it has low maintenance costs as compared to gates made from galvanized materials which require regular maintenance especially if used in public places and homes. On the other hand; stainless are easier to clean which may not be true with other materials used in gate manufacture.

Galvanized gate
A galvanized gate is susceptible to stains and any other substances if exposed to such as acids. Galvanized gates require constant attention such as cleaning which may be expensive as compared to stainless gates.

2. STRENGTH
Stainless steel gate
Very strong hence able to retain its structural integrity whatever the circumstances that it may be subjected to. For example even if the gate is exposed to an outbreak of fire, the gate will retain its integrity. This is enough security for those interested in long lasting gates or those living in areas prone to fire outbreaks. In some instances, some people may want to use fire in order to access a restricted area. With a stainless gate, their efforts may not yield them much.

Galvanized gates
May be stronger depending on the level of coating and the method of coating used. When exposed to other external conditions such as fire, they may not be able to withstand as stainless steel can.

3. COST
Stainless steel gate
As compared to galvanized gates, stainless steel is relatively cheaper. The fact that it is stronger and cost lower, many people can afford it in an effort to enhance their security and privacy. Many people say that “cheap is expensive” but this not true with gates made from stainless steel. They give you value for your money as you do not have to budget for another gate time and again.

Galvanized gate
It is expensive as compared to stainless gate as a layer of Zinc must be coated throughout its circumference. For a thicker and better coat, you have to dig deeper into your pocket. This makes it unaffordable by many who may be in need of a gate. The method used in galvanizing iron will also determine the cost of the gate and how exposed the gate will be to external conditions.

4. LUSTER
Stainless steel gate
As a material has got that luster which is common and familiar with many people. Because of this property, it can easily be used in many applications including the construction of gates. It is a luster which everyone else can associate with. This makes it popular as opposed to other materials.

Galvanized gatesHave nice looking appearances as compared to stainless steel which is too common. With galvanized gate, you are sure of that unique and nice looking structure.

5. RESISTANT TO CORROSION
Stainless gatesResistant to corrosion which may be as a result of gates facing the sea or dust accumulation. Corrosion is an enemy and if it goes on for some time without being checked, the whole gate is likely to come down. This might be very expensive to home owners or any other place where it is used to control movement.

Galvanized gate 
Resistance to corrosion varies depending on thickness of the Zinc coat which is applied on them. This implies that the gates are very much vulnerable to corrosion which in the long run means that the gates may fall down unlike those made from stainless steel. Secondly, such gates may be expensive if you want a thick layer of Zinc in order to avoid unnecessary corrosion.

Friday, March 21, 2014

5 Tips On Choosing The Right Windows For HDB Parapet/Balcony

If you have chosen to live in a housing development board flat, then you have made a conscious decision to live in a densely populated neighborhood. You will now be living with a lot of strangers and people who might have a lot of problem with the way you carry your home maintenance. Keeping these things in mind, Housing boards has framed certain guidelines regarding the repairing, renovation and installation of any part of the home. This is done for the uniformity of laws regarding the residence of various people with different set of cultures and customs, living in the same building. It also helps crucially in keeping the spirit of the nation and saves people from fighting over petty issues.


















5 Tips On Choosing The Right Windows For HDB Parapet/Balcony


The guidelines set by HDB are extensive in nature as every possible repair/ replacement has been considered while drafting it. Moreover there are strict guidelines for the dos and don’ts corresponding to each of the element of any typical home. For the elements like Windows for HDB balcony, windows for HDB parapet and balcony extensions etc., there are rules in the forms of dimension which are to be followed at any cost to maintain the discipline of living in an HDB flat.

If you don't like any element of the home you can certainly go for its replacement. You have the liberty to choose from anywhere but the boardwon’t be financing it and you have to pay for it from your pocket only. In this article we will give you 5 tips which are essential for choosing the right like Windows for HDB balcony and windows for HDB parapet.

1. Permission: - The very first needed to be done even before starting the renovation or replacement of windows for HDB parapet or like Windows for HDB balcony, is to take the permission for it. This is process is surely going to take a bit time but in the end it is going to save you from a lot of troubles in future. If you have done the replacement on your own then you can get entangled in legal matter and would not only have to pay fine but also waste a lot of energy and time is handling the situation so it’s better to take written permission from the housing development board prior to the start of work itself.

2. Approved window contractor: - You must also not forget to engage a window contractor registered by HDB and approved by BCA. There are various benefits of getting the work done with a registered and approved contractor. You will not have to pay extra charge as the private contractors have a tendency to do. There are fixed price for getting a particular work done, which can be consulted with the contractor or the board itself. Moreover in case of any mishap, you can find and claim the responsibility of poor work on the contrctor.

3. Follow the October 2004 legislation: - The most important thing is to follow the safety norms in the context of replacement of Windows for HDB balcony. For a safer living environment in any housing board flat, legislation was passed in October 2004. This legislation ensures that windows for HDB parapet are maintained in good condition and are secure for everybody. The law not only regulated the design and installation of windows but stated the need to replace the aluminum rivets in aluminum casement windows by stainless steel rivets.

Moreover you need to replace windows even if you are satisfied with their working and aesthetes in accordance with the legislation.

4. Replacement Parameters: - Know the parameters for the replacement of Windows for HDB balcony. The parameters regarding the replacement of windows are listed below

a. Width of the window panel for a casement window should be in the range of (500 to 700) mm whereas for sliding window it can be in the range of (500 to 1200) mm. 

b. There should be at least 4 rivets on each side of the friction stray. 

c. Rivets with stainless steel grade 304, should only be used for fixing the windows. If not available then equivalent rivets of minimum 4.8 diameter can be used in place. 

d. All kind of corner brackets should be replaced by zinc casted corner brackets. 

e. You should also not forget to preplace the loose or cracked glass panels and rubber gasket. 

5. Submit the retrofitting report: - Submit retrofitting report upon completion. This will be provided by the approved contractor duly signed by the installer. You should also note that failure to submit this report may cost you $5000 or 6 months jail term.